Feeding the Fire
Street Terror Series Dominators
If you have a large cubic-inch torque monster big-block or a high-rpm big-horsepower small-block that you use on the street, SMI can build you one of its Street Terror Series Dominators. These are currently available in sizes ranging from 900-1,200 cfm. SMI designs and calibrates these units specifically for vehicles that will see action on both the track and the street. The idle, transition, and main circuits are modified to eliminate the rich running condition normally associated with the Dominator Series Carburetors. SMI Carburetors feature a bright silver main body finish and brilliant, high-gloss gold-finished metering blocks and float bowls.
Sean Murphy Induction
714.843.9169 • smicarburetor.com
If you’re storing your street machine for the winter, here’s a simple way to prevent flat spots. These non-slip Flatstoppers ramps will cradle your tires and disperse weight evenly to prevent flat spotting during storage. These ramps have a lightweight construction, made from durable materials, and measure in at 22.34x13x3.39-inch (length by width by height).
California Car Cover Company
800.423.5525 • calcarcover.com
Coil-Over Shock Mock-Up Tool
This innovative new tool lets you simulate your vehicle’s final ride height before the body or engine is installed. Adjustable from 131/2 to 21 inches, it’s the perfect tool for setting up custom coilover suspensions, allowing you to determine proper shock length prior to ordering your coilover shocks. The Coil-Over Shock Mock-Up Tool is sold in pairs and includes 5/8-inch rod ends, 1/2-inch reducers, jam nuts, and quick-release pins for easy length changes.
800.979.0122 · speedwaymotors.com
Make Mine a Six
GM LS Eight-Bolt Crank Tremec T56 Install Package
This package is built to be used with Tremec T56 six-speed transmissions behind any LS-based engine with an eight-bolt crankshaft flange, and will support up to 650 lb-ft of torque. This kit is also designed for use with a hydraulic throw-out bearing (clutch master cylinder is not included) and comes with everything you need to complete your install.
888.748.4655 · paceperformance.com
EFI Fuel Tanks for Tri-Five Chevys
Tanks has designed an affordable stock-style powdercoated gas tank ready for fuel injection, and, once installed, it has the appearance of a factory gas tank. Features include internal baffling needed for late-model engines, a recess for the fuel pump and sending unit to ensure that you have adequate space for all of your fuel lines, and wiring with no modification to your floor. Tanks has replaced the leak-prone factory sending unit with the standard SAE five-bolt sending unit to make gauge swapping a snap.
877.596.3842 • tanksinc.com
Skinnies for the Strip
DOT-approved 17-inch front runner tires
Phoenix Race Tires is one of the first companies to debut a race-proven bias-ply front runner tire to comply with the recent influx of narrow 17-inch wheels. That means you can easily bolt up a set of lightweight drag tires and wheels on your late-model muscle car without worrying about brake clearance. In addition to the clearance and performance aspects, this new Phoenix front runner is DOT-approved and sized at 4.5/27.0-17. The compound isn’t ideal for everyday driving, but the tire is safe for highway use.
Phoenix Race Tires
866.513.2743 • dragracetires.com
TH400 Trans Cooling Pan
Derale offers this GM TH400 Deep Transmission Cooling Pan. Featuring heavy-gauge steel construction, 3 quarts, 8 ounces of extra fluid capacity, and patented turbulator cooling tubes, reduces fluid temperatures 20-50 degrees F. A two-stage heat-dissipating black finish, 1/8-inch NPT temperature-sender port, magnetic drain plug with rubber/steel washer, and pan gasket included.
323.266.3850 • derale.com