Chevy Hi-Performance Homepage Chevy High Performance
Prev Next
The best way to remove the old bushings is to press them out using a hydraulic press and a support to prevent the thin sheetmetal stamping from collapsing under the pressure. If you’d rather do it yourself, you can hammer the bushings out with a punch and hammer like Keith did. It’s tough work, but it can be done. Note that Keith has whacked his hand with the hammer before, so he’s using a Vise-Grip on the chisel. Be careful not to damage the control arms.
Suspended Reanimation

The best way to remove the old bushings is to press them out using a hydraulic press and a support to prevent the thin sheetmetal stamping from collapsing under the pressure. If you’d rather do it yourself, you can hammer the bushings out with a punch and hammer like Keith did. It’s tough work, but it can be done. Note that Keith has whacked his hand with the hammer before, so he’s using a Vise-Grip on the chisel. Be careful not to damage the control arms.  View Related Article

 

Get Adobe Flash player