Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
Milodon Windage Tray Closeup Made A Cut With A Grinder So The Tray Will Fit
Milodon Oil Pan Install - CHP Step By Step
In order for the new Milo don wind age tray to fit while paired up with the new pick-up, we had to make a small notch with a grinder. With the grinding out of the way, we washed it again to prevent any foreign material from entering the engine. View Related Article
454 Big Block Engine Windage Tray With Fuel Pump Installed Two Oil Pans Side By Side Milodon Oil Pan Next To Old Pan Removing Old Oil Pan Off Removed Stock Oil Pan Off Old Silicone On Engine Scraping Silicone Off Where The Oil Pan Was Using Breaker Bar And Socket Removing Main Bolts From Third And Forth Main Cap Oil Pump In Hand Removed Old Oil Pump Oip Pump Pickup Press Fit End Into The Oil Pump
Milodon Windage Tray Closeup Made A Cut With A Grinder So The Tray Will Fit Sliding Windage Tray In With Notch Out The Tray Slides Right In Windage Tray In Place Tighting Windage Tray Into Place Bottle Of Right Stuff Sealant Using Right Stuff Silicone Sealant Closeup Of Pan Using Arp Bolts To Fit Everything
Chevy High Performance
Chevy Hi-Performance