Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
Installing Linkage In The Gm Lever Making Sure Lever Can Move Forwards And Backwards
Installing Linkage In The Gm Lever Making Sure Lever Can Move Forwards And Backwards
The last bit of linkage to be installed is the GM lever. We removed the factory piece and installed the new one with the original selector nut. We then torque the nut down to 23 ft-lb and made sure the lever was able to move forward and backward smoothly with a positive click in each direction. View Related Article
Tci Floor Mounted Shifter Side View Tci Shifter Top View Shifter Brackets Marking With A Sharpe Where To Drill Holes Drilling Holes For Floor Mount Make Sure When Drilling Not To Hit Any Wires Measuring For Shifter Shifter Needs To Be 3 And Half Inches From The Center Drill Straight Up Drilling Holes For Shifter Cable Shifter Components Assembled Shifter Components
Shifter Cable Shifter Cable Fed And Tighten Down Attaching Block To The Cable Clipping Shifter With Its Retaining Clip Floor Shifter In Place Bolted Floor Shifter Down Feeding Cable Though The Floor Bolting Cable Near Transmission Making Sure Cable Was Snug Tighting Cable Installing Linkage In The Gm Lever Making Sure Lever Can Move Forwards And Backwards Self Made Wiring Harness Desciption Of What Wires Do What
Gear Indicator Hooking Up Gear Indicator Shifter Installed Shifter Installed Without Base Shifter Installed Tci Shifter Installed With Base
Chevy High Performance
Chevy Hi-Performance