Carburetor Fuel Jets & Power Valve Swap - More Flow - CHP Step By Step
|
For the best view possible, we set the Quick Fuel Technology Super Street Series 735-cfm carburetor on a small-block Edelbrock Performer intake manifold. Normally on a running engine, fuel would fill the outer bowls. We began on the primary side of the carburetor (facing radiator). Using a 5/16-inch box wrench we loosened and removed the lower corner bolt first. This allows for any remaining fuel in the bowls to drain out. Then we removed the rest of the surrounding bolts to take the bowl off. View Related Article
|
|