September 2010 Chevy Performance Parts - CHP Parts

Forging Ahead
22-Inch Alloys
Boze now offers an all new Torque concave design for your street car. Boze's special center forging provides a much deeper look from the street side but also allows fitment of larger aftermarket big-brake kits. Each set of wheels are custom built in the USA, feature 6061-T6 aluminum construction, and are available in 17- to 22-inch diameters with your choice of 7- to 15-inch widths. A unique variety of finishes are offered along with custom-engraved caps to personalize your new wheels.

Spark Up
ZZ Crate Engine Ignition
Never second-guess your ZZ-4, -454, or -502 crate ignitions again with Performance Distributors' Davis Unified Ignition (D.U.I.) systems. The D.U.I. systems are specifically calibrated for the advance curve on a distributor machine to accommodate the GM Performance Parts timing recommendations. The optimized curve provides instant throttle response and maximum performance throughout the rpm range, while protecting your crate engine from detonation. To properly mesh the crate engine's steel hydraulic-roller camshaft, a melonized distributor gear is used. The distributor comes complete, including the dependable Street/Strip D.U.I. Coil and Dyna-Module that allows you to open up your plug gaps to 0.050-0.055-inch to provide a more complete fuel burn. Magnetic pickup coil power is ensured by aligning the teeth on the pickup to the teeth on the shaft reluctor to very exact tolerances. An additional step that also ensures maximum magnetic pickup coil power is the hand-setting of the endplay between the distributor gear and the distributor housing.

Faster & Easier
Gel Wax
Reducing the amount of time it takes to clean and wax your ride is always a plus. Eagle One simplifies the process with their new gel wax that eliminates the need for extra wiping. Once the product is applied, there is no hazing or drying necessary; just apply the wax to one section and wipe off immediately. Additional benefits include no white residue or any discoloring of black trim or molding. The gel wax is made with natural carnauba and unique polishers and is environmentally friendly.

Big-Time
16-Inch 2010 Camaro Brakes
Designed for maximum stopping power and minimum brake fade, AP Racing brakes from Stillen are now available for the 2010 Camaro. The carefully matched front and rear kit includes AP Racing six-piston front calipers with oversized 16-inch, two-piece floating vented rotors and four-piston rear calipers with 15-inch, two-piece vented rotors. The kit comes complete with calipers, rotors, brake pads, coated stainless steel braided brake lines, and all necessary mounting hardware. Both front and rear rotors are available in a cross-drilled and slotted pattern for an aggressive pad bite and better face cooling. Slotted only rotors are also available. Ferodo brake pad compound DS2500 is standard and is uniquely formulated for high load and extreme heat, up to 1,100 degrees F.