Bigger is always better, right? In this case, yes. ProCharger has new Stage II units for the 2010 Camaro SS in a Tuner Kit or complete system, featuring a larger front-mounted air-to-air intercooler along with a new low-restriction air inlet and larger air filter.
The new Stage II system is 100 percent complete with a P-1SC-1 ProCharger and includes injectors; a computer programmer; and utilizes an 8-rib, dedicated drive and tensioner system, with a 12-rib dedicated drive available as an upgrade on Tuner kits. Heavy-duty brackets provide a solid, stable mounting location for a wide range of ProCharger models, including the standard P-1SC-1. The larger ProCharger D-1SC, F-1D/F-1/F-1A, or F-1C/F-1R supercharger models are only available in the Tuner Kit.
Procharger's Tuner Kit is designed specifically for the 2010 Camaro SS owners who are planning future engine modifications. It's identical to the Stage II system, but comes without fuel injectors and the hand-held ECU programmer.
Price: $6,800 & up
Procharger
913.338.2886
procharger.com
Stop In Time
Bolt-On Rear Disc Brake Conversion
MBM Brakes conversion kit allows an all-in-one solution for 9-inch rearends to upgrade to performance disc brakes. MBM's DBK9 kit offers an easy to install, bolt-on solution that provides all the brackets and flanges that fit the three most popular sizes of the 9-inch rearend (33/8x2-inch, 31/2x23/8-inch, and 39/19x2-inch). The DBK9 comes in both standard and high-performance models. The high-performance LX kits upgrade to cross-drilled and slotted rotors and stainless steel braided brake lines. Both kits are also available as a full power brake upgrade which includes a power booster and master cylinder in addition to the basic conversion kit.
Price: $450 & UP
MBM Brakes
800.231-4125
mbmbrakeboosters.com
Updated View
'67-69 Camaro Vhx Series Instruments
Dakota Digital VHX series of instruments offer lighted needles, backlit faces, and full character message centers for all displays, while also providing a fresh approach to outfitting a custom vehicle. The VHX Series also utilizes solid state sensors and precision stepper motors for the ultimate in accuracy and is engineered to accept future plug-in expansion modules, allowing nearly any type or amount of vehicle data to be shown within the message centers. The '67-68 model attaches directly into the stock instrument pod, while the '69 model includes a reproduction dash carrier. Both utilize either a stock or aftermarket wiring harness, in addition to compatibility with a stock, modified, or late-model drivetrain. Systems are available with a blue or red display color and either a satin silver or carbon-fiber styled face.
Price: $795 & UP
Dakota Digital
888.200.8785
dakotadigital.com
Show Off
'70 Chevelle Super Sport Grille
Quality reproduction grilles are hard to come by. Auto Metal Direct now offers premium '70 Chevelle grilles molded from heavy-duty plastic just like the OEM's. Best part is the grilles have been test-fitted by restoration experts and are guaranteed to fit and can be easily painted a silver color for correct appearance for Malibus. AMD's grilles are also licensed and approved by The General too!
Price: $165
Auto Metal Direct
866.591.8309
autometaldirect.com
Late-Model Drop-In
Single Pump Vette Fuel System
One of the single largest issues with late-model performance vehicles is the limitations of the fuel system. Aeromotive's unit will support big power from a single pump without having to piggyback one, two, or three together. Plus, it prevents drilling of the tank or the risk of twin-pump failures. The new system for 20031/2 and later Corvettes is a complete drop-in fuel system (PN 18670 and 18671). The system gives a choice of two proven fuel pumps, an A1000 or Eliminator. The best part, the complete assembly drops into your factory tank while still incorporating the factory jet siphon system. It even includes the pre-filter, bracket, and all the necessary plumping for installation.
Price: $750 & up
Aeromotive inc.
913.647.7300
aeromotiveinc.com