Keyless Ignition System
Flaming River’s third-generation keyless ignition system now incorporates a fob docking station for reliability, and comes with a keyless vehicle entry system. The kit is complete with door lock actuators, antenna assembly, push-button ignition, relay pack, control module, and actuator mounting hardware.
Lightweight Lithium Battery
The L680 Lithium Powerpack is fully alternator compatible and weighs only 5 pounds, 8 ounces, making it the perfect companion for race cars. The 12V Lithium-Ion battery is rechargeable, has 25 minutes of reserve power, and a total capacity of 11 Ah. It can deliver 800A max and 125A continuously; enough to start engines up to 500 ci and supplement the alternator’s output.
102mm Intake Manifold
FAST has developed a three-piece polymer intake manifold for the rectangular port GM LS3-type engine. The design allows for easy disassembly and porting of the individual runners for modification. It also offers a lightweight alternative while also adding strength and improved heat dissipation. Other features include integrated nitrous bungs and will accommodate either the stock or FAST 102mm throttle body without clearance issues.
2-Stage Paint In Quart Sizes
To provide the perfect amount of paint for two-tone paint schemes, flames, or other accents, Summit Racing is now offering their line of two-stage basecoat paints in quart sizes. It’s formulated to add vivid color, dramatic depth, excellent gloss, and great metallic control to any paint project. Flash time between coats is just minutes, and it’s dry and ready for a clearcoat in less than an hour.
Digital Hei Module
MSD’s Heat Digital HEI Module will fire up your stock GM HEI distributor. MSD’s HEI Module is a direct plug-in for the factory four-pin HEI module and will produce up to 7.5 amps of current. This increased energy will continue through racing rpm, reaching 9,000 rpm. The module offers extremely accurate ignition timing and allows the user to dial in the rev limit from 2,000 to 10,000 rpm.
Touch of a Button
Latching Relay Module
The Latching Relay Module (PN 510170) from American Autowire replaces a dimmer switch and allows you to switch between high and low beams with either a momentary push-button turn signal switch (PN 510169) or a momentary push-button tilt lever switch (PN 510168). It also automatically resets the headlights to the low-beam position when the headlight switch or vehicle is turned off, and allows the user to flash the high beams.
For the Road
Classic 5-Spoke Mag Wheel
The Mag wheel’s five-spoke design features a precision cast center available either polished or powdercoat gray and includes a bolt-on center cap. Available in 17-, 18-, and 20-inch diameters, each wheel is built to your specs at no extra charge. Best of all, they’re made in America.
Flanged Turn-Down Exhaust Inserts
Car Chemistry sound suppression inserts are now available with a flanged turn down. The bolt-on collector flanges reduce sound levels and also increase performance. The inserts are designed to increase flow by actually drawing exhaust gases through the exhaust system, while decreasing sound decibels and directing the exhaust away from the vehicle.