Now available from Lowe’s is the
Kobalt 129-piece standard/metric
mechanics tool set with case (PN
338515). Upgraded chrome vanadium
steel 72-tooth ratchets as well as size
laser-etched color-coded sockets,
make this set the perfect holiday gift.
It has 71 sockets, including shallow,
deep, and spark plug; two quickrelease
ratchets (3/8- and 1/4-inch
drive); four wrenches; four drive tools;
extension; and 50 additional tools.
Undercover Innovations has got
you covered, literally. If you have an
overheating problem with your classic
car, they might have a solution for
you. Or if you’re tired of looking at the
unattractive front of your radiator, let
them dress it up. GMs, Fords, and
Mopars, they’re adding new models
all the time. Licensed by GM engraved
logos and custom engraving also
available. Valve covers with custom
engraving are available, too.
House of Kolor Shimrin2 Universal
technology has arrived! Coast to
coast, custom painters are busting
the waterborne myths thanks to this
revolutionary, solvent-based basecoat/
FX Effect Pac system. Shimrin2
Basecoats are a three-component
system that consists of House of
Kolor’s S2 FX Karrier Bases, S2-FX
Effect Pacs, and RU Series Kosmic
reducers. Shimrin2 is the future
of kustom painting available now,
compliant throughout the United
States, including California.
SPEC Inc., the innovator in GM LS
clutch technology, introduces their
new line of single-disc performance
clutches for C5 and C6 Corvettes. The
new design is currently shipping and
features the same extreme capacities
you would expect from a SPEC clutch,
but with a pedal effort reduction of
over 10 percent and no measuring/
shimming and no hydraulic upgrade
installation. These kits have the same
release window as the original selfratcheting
units, but with the increased
performance, reliability, and safety
these cars demand. These kits support
power levels up to an amazing 1,000
lb-ft of torque for the street/strip units
and 1,200 lb-ft for drag-specific units.
The Universal Billet-Power rack-andpinion
is made of all-new components,
including the valve and piston, and
is available for front and rear steer
vehicles. Billet “pillow blocks” allow
for universal mounting and the
pinion shaft rotates to align with your
vehicle’s steering shafting. Each
rack produces more than 6 inches of
travel and provides full turning radius.
Made in United States with lifetime
serviceability.
PN FR40020: Rear Steer Power Rack,
$699
PN FR40022: Front Steer Power Rack,
$699
Do you have a car guy on your gift
list but aren’t sure what to put under
the tree? Check out ATI Performance
Products’ 50th anniversary catalog!
It’s chock-full of high-performance
parts for a variety of GM applications.
Quality, American-made transmissions,
converters, super dampers, parts, and
accessories for the street and strip are
right at your fingertips! If you’re not
sure what to choose, get an ATI gift
card—any amount, no hidden fees, and
it never expires!
This holiday season, get your
friends and family something they
really want … horsepower! Kooks
Headers and Exhaust makes the best
exhaust products that make the most
horsepower and torque for your latemodel
GM. Whether it’s on the track or
the street, Kooks has a system that will
get you first to the finish line. Put their
50 years of race-proven experience to
the test and call today!
’98-’02 Chevy Camaro, Firebird, Trans
AM dual exhaust, PN 65-9802-OX-Dual
(off-road shown, catted also available)
Art Morrison Enterprises presents, the
all-new GT-Sport Chassis for ’64-72
A-bodies. Featuring a new A-arm
front and triangulated four-bar rear
suspension this GT-Sport chassis will
deliver a high level of performance
to GM A-body enthusiasts. Included
are framerails designed to tightly fit
the stock floor, and all the appropriate
body, bumper, core support, engine,
and transmission mounts. Will fit ’64-72
Chevelle, El-Camino, Buick GS, Olds
442, and Pontiac GTO bodies.
AFR’s 245cc NPP head flows a
whopping 350 cfm, and is capable of
750-plus horsepower while maintaining
conventional 23-degree intake port
locations that accept standard intake
manifolds. While sharing the valve
centerlines and rocker stud locations
as the popular 227/235cc head, it’s
mandatory to use a shaft-mount rocker
due to widening the pushrod pinch,
allowing a more direct shot at the
valve. Standard equipment includes
lightweight 8mm valves (2.125/1.600)
with reliable bead lock grooves and
high-quality PAC 1.550 solid roller
springs.
Muscle Factory now has in-stock ’66-
72 GM A-body bucket seat foam and
’68-72 bucket seat springs. Replace
your old broken springs and worn-out
foam with these new reproductions.
The Muscle Factory also has new seat
covers, knobs, and buttons to finish
off your bucket seats. They carry a full
line of quality Chevelle and El Camino
parts.