For over 32 years Ross Racing
Pistons has been a leading name in
piston manufacturing and continues
to provide the best possible pistons
for your specific application. From
classics to muscle cars to full
competition racing, Ross is the piston
company of choice worldwide. Most
significant advancements in piston
technologies are featured in custom
pistons, but Ross offers these same
advancements directly off the shelf in
their stock pistons. All of Ross Racing
Pistons offer far superior lightweight
forgings, centered around strength and
efficiency.
While weight is important, Forgeline
focuses on strength and wheel stiffness
as their main goal. Their newest
competition wheel, the GA3R, has a
street load rating of 2,100 pounds.
This massive rating is required on
true competition wheels because the
G-load a race tire can generate cuts
that load rating in half. The load a
wheel sees under racing conditions is
substantially greater than on the street.
The GA3R is available in 18, 19, and 20
inches for the Camaro in virtually any
width and offset, and can clear even
the largest aftermarket brake kits.
Nickey Chicago, with the backward
“K”, home of the original 427ci Camaro,
presents the '12 45th Anniversary
Edition Nickey Camaro. It is available
in Stage I, 500 hp; Stage II, 600-800
hp; or Stage III, 700-1,000 hp or more.
They're now accepting orders to have
your very own Limited Edition 45th
Anniversary Nickey Camaro custom
built to your specifications, just like
“back in the day”.
Help your car or truck enthusiast
research and repair their favorite
vehicle by giving Haynes, Chilton, or
the original factory service manuals.
Find repair manuals in print and on
computer disc under Literature at
RockAuto.com. Don’t know which
manual they most need? Then give a
RockAuto gift certificate and let your
enthusiast have fun shopping the huge
selection of parts, tools, and more that
are available for their vehicle.
With 300 lb-ft max torque and 0-1,900
rpm, the Kobalt 1/2-inch lithium-ion
Impact Wrench (PN 325931) offers the
convenience of a cordless tool while
still providing all the power you’ll need
to get the job done, whether you are
working on your car or a home DIY
project.
Includes two extended-run lithium-ion
batteries, lithium-ion/NiCd charger with
digital status display and countdown
timer, and Kobalt contractor hard case.
Fesler Billet's ’70-73 Camaro trunk
hinges are designed to replace the
original steel hinges. They're made
from aerospace-grade 6061-T6 billet
aluminum and use a high pressure,
nitrogen-filled gas strut instead of
compression springs to lift and lower
the vehicle’s trunk lid. Available in
seven finishes—natural, polished,
brushed, chrome, black anodized, clear
anodized, and gray anodized—the TH-
2CAM offers more stability and support
than GM’s original design. Each gas lift
support is engineered to a 50,000-cycle
lifetime and is covered by a limited twoyear
marine environment warranty. The
hinges are backed by GM Restoration
Parts, and manufactured
Steer your Camaro right this holiday
with ididit’s ’67-75 Made to Fit steering
columns. These all-new, 100 percent
American-made, eight-position tilt
Bolt-N-Go columns are perfect for any
box or rack-and-pinion application. By
simply choosing your finish of paintable
steel, chrome, or black powdercoated,
the only other choice you need to make
is whether or not it’s worth testdriving
your car in the snow.