Wiper Motor Kit
Is it time to replace that obsolete wiper motor on your ’55-56 Chevy car? Southern Rods and Parts has the answer with its new two-speed windshield wiper motor kit. These kits come complete with a pre-wired two-speed switch and switch extension to use for factory knob and bezel—at no extra cost! This motor mounts to the factory location and uses your OEM wiper mechanism with no hidden costs or options to buy.
Universal HHP IRS
The new Universal HHP IRS features a fully welded and boxed, cut-to-fit upper crossmember, heavy-duty upper and lower control arms, fully welded uprights, heavy-duty constant-velocity joints and axleshafts, as well as Heidts’ own cast centersection that can be loaded with a wide range of gear ratios and Positraction differentials. The HHP IRS also makes use of standard 10.5-inch inboard-mounted disc brakes with four-piston Wilwood calipers. Based upon the intended vehicle application, the Heidts sales team will help the customer select the proper spring rates for the coilover shock assemblies. To aid in custom installations, the HHP IRS is available in both 56- and 58-inch wheel-track width versions.
Heidts Hot Rod Shop and Muscle Cars
800.841.8188 · heidts.com
Stage 2 TVS For '70-'81 Camaros
The Hotchkis TVS already provides drivers with Sport Coils, Sport Sway Bars, Heavy-Duty Tie-Rod Sleeves, and Sport Leaf Springs, and the new Stage 2 system adds to that package with Tubular Upper and Lower Control Arms, which increase caster and improve the camber curve increasing frontend grip and traction, low-profile Subframe Connectors to stiffen the chassis, and Hotchkis Tuned/Bilstein shocks for improved vehicle control and stance. The result is a complete handling package matched and tuned for both street and track driving, which addresses alignment, stance, and chassis stiffness, and reduces body roll, wheelhop, and axle wrap-up.
Billet Aluminum Hood Hinges For '62 Impalas
Eddie Motorsports has recently added to their line of billet aluminum hood hinges for Chevy Impalas with the introduction of their new model for ’62 Impalas. Eddie’s line now includes hinges for ’61-68 and ’70 Impalas. CNC machined from billet 6061-T6 aluminum in their Southern California facility, Eddie Motorsports’ Impala hinges employ stainless steel nitrogen-filled gas struts in place of the stock inferior coil springs. They also use high-quality needle bearings for a smooth and reliable operation. Designed as direct fit, “bolt-on” units, the hinges utilize the stock mounting holes that have been elongated for ease of gap adjustment. Eddie’s billet hinges are offered for steel, fiberglass, or carbon-fiber hoods and are available with a machined or brightly polished finish or in a wide variety of Fusion-coated colors.