’67-69 Camaro Fast Track IFS/IRS chassis system
The new Camaro Fast Track chassis utilizes Roadster Shop’s very own proven Fast Track front and rear fully independent suspension systems. This chassis is specifically and uniquely engineered to incorporate modern suspension technology into your treasured vintage muscle car for an unbeatable combination. Based around proven C6 Corvette spindles and hubs, RS employs their own unique suspension geometry, offering increased negative camber gains and controlled roll center. The large diameter tube control arms bring an increase in strength and additional clearance to run up to a 10-inch-wide front and 12-inch-wide rear wheel. The Fast Track IFS and IRS have been designed as a system with matched camber curves and roll centers for a dynamic front/rear balance equaling predictable performance. CAD lightweight materials are used to ensure strength and reduce the unsprung weight. Delrin bushings have been specifically machined to eliminate deflection while reducing vibration. Custom 300M drive axles and billet 930 CV joints have been machined specifically for this application with ratings exceeding 1,000 hp to meet the demands of today’s performance-minded driver.
847.848.7637 · roadstershop.com
’64-72 Chevelle Gauges
Offering lighted needles, backlit faces, and full character message center for all displays, the VHX Series provides a fresh approach to outfitting a custom vehicle. The VHX Series utilizes solid-state sensors and precision stepper motors for the ultimate accuracy, coupled with a limited-lifetime warranty for complete support both now and in the future. The VHX Series utilizes either a stock or aftermarket wiring harness, and either a stock, modified, or late-model drivetrain. Systems are available with a blue or red display color and either a satin silver or carbon-fiber–style face.
800.593.9776 · dakotadigital.com
Bolt-in Full Frame for ’68-74 Nova
The Schwartz G-Machine chassis offers sports car–like 1.08g handling capability and ride quality similar to a European luxury car. Engine mounts are available for both modern LS and older small- and big-block Chevy engines. All Schwartz Chassis feature greasable needle bearing upper A-arms, separate shimless camber and caster adjustments, four-bar rear suspension with Teflon-lined spherical rod ends for bind-free operation and a smooth ride. Fitment is similar to the Schwartz chassis for the ’62-67 Chevy II Nova in that the front subframe is removed from the body. The Schwartz chassis then bolts into the remaining stock unibody structure. Mini-tubbing is not required for fitment, but doing so will allow room for 345/30R19 tires. The resulting Pro Touring–style stance is a couple inches lower than stock. Chassis rail ground clearance is similar to the stock subframe. No floor cutting is required to fit the chassis.
815.206.2230 · schwartzperformance.com
Hurst Aluminum Paddle Shifter for Fifth-Gen Camaros
Easy-to-install aluminum paddle shifters are available for both V-6 and V-8 Chevy Camaros and add ease and ergonomic convenience, as well as an F1-inspired look and feel to any automatic transmission–equipped fifth-gen. Hurst paddle shifters put transmission control at the tips of the driver’s fingers. The kits are easy to install and operate, and require no removal of the steering wheel, airbag, or wiring to complete the installation. Each Hurst kit includes a set of adjustable paddle shifter levers, which can be placed in a custom position for increased driver comfort, and all mounting hardware comes standard.
818.483.1366 · hurst-shifters.com