1969 Chevy Camaro Restoration Completed - Thrasher Camaro, Part VI
|
Next, I fabricated a steel sump box to create a low point at the rear section of the gas tank and welded it in place. I welded braided-steel line fittings into the tank at the front along with a bracket for the fuel pump and filter assembly. The pickup line is on the passenger side of the tank and the return is on the driver's side. To prevent this elaborate "stock" tank from rusting, the tank was coated inside and out with the Renu process by Matson's Radiator in Stanton, California, 714/826-0357. View Related Article
|
|