Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
Installing The Dust Cap
1964 Chevy Chevelle Front Disc Brake Conversion - Braking Effects
A couple taps from the rubber mallet is all you need to seat the dust cap in place, and the hub is as good as done. View Related Article
Brembo Front Disc Brakes Installed Taking Out The Castle Nut Removing The Tie Rod Starting To Remove The Spindle Tapping Out The Stock Drum Brakes Lifting The Spindle And Drum Brakes Off Checking The Ball Joints
Cpp Forged Drop Spindle Installing Cpps Drop Spindle Adding The Castle Nut Brembo Grade 8 Hardware Cpp Drop Spindle Packing Inner And Outer Bearings With Grease New Aluminum Hub
Aluminum Hub Packed Installing The Cotter Pin Installing The Dust Cap Installing Aluminum Bracket Cpps Floating Brake Rotor Checking For Wheel Clearance Installing Brembo Two Piece Caliper
Installing Braided Steel Brake Lines Reinstalling The Tie Rod Brembo Front Disc Brake Conversion Kit Installing 17 Inch Coy Wheels
PRI Trade Show
Chevy High Performance
Chevy Hi-Performance