Related Photo Galleries
The Baer brakes package is a complete bolt-on affair. I told Currie what type of brakes I wanted to run, and they built the rearend with the correct mounting pads, axles, and housing tubes. The housing was ordered in the stock width to simplify the wheel selection which will be BBS RK wheels--18x8.5-inch up front and 18x10-inch in the rear. I selected BF Goodrich Comp T/A tires with 245/40ZR18s up front and 295/40ZR18s in the rear. The SED spindles bolt directly to the 13-inch Baer rotors and dual piston calipers. Notice the wheel speed sensor in the center of the spindle (right).