Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
Pressing Out The Old Bushings
Pressing Out The Old Bushings
Paint To Protect
We arrived at ACE Automotive Services in Northridge, CA, where Alex Hernandez pressed out all of the old bushings from the upper/lower control arms. Hernandez also removed the ball joints. We also had ACE press in the new PST bushings along with installing the new ball joints with zerk fittings. The whole job only set us back $70. View Related Article
Chevy El Camino Frontend Rebuilt Shot Of Our El Camino Undercarriage Removing The Tie Rods Removing The Sway Bar Rusted Hardware Removing The Stock Springs Removing The Lower A Arms
Removing The Upper Control Arms Pst Bushings Factory Stock Bushings Pressing Out The Old Bushings Tapping Off The Chevy El Camino For Primer Undercarrage Primered Upper Control Arm Painted
Adding Some Grease To The Bushing Ends Rebuilding The Passenger Side Installing The Upper Control Arm New Springs Next To The Old Ones Replacement Ball Joint Covers Getting The New Spring In Installing The Brake Assembly
Installing Kyb Gas A Just Shocks New Sway Bar Next To The Old One Tighten The Endlink Front End Rebuilt
Chevy High Performance
Chevy Hi-Performance