Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
Getting The New Spring In
Chevy El Camino Front Bushings, Shocks, Drop Coils & Sway Bar Upgrade - Surgical Joints
To get the new PST springs in, we seated the end of each coil into the bottom of the control arm with the level portion of the spring facing up. We lined up the bottom coils with the two holes punched through the bottom control arm and made sure to fit the top of the spring into the upper seat. View Related Article
Chevy El Camino Frontend Rebuilt Shot Of Our El Camino Undercarriage Removing The Tie Rods Removing The Sway Bar Rusted Hardware Removing The Stock Springs Removing The Lower A Arms
Removing The Upper Control Arms Pst Bushings Factory Stock Bushings Pressing Out The Old Bushings Tapping Off The Chevy El Camino For Primer Undercarrage Primered Upper Control Arm Painted
Adding Some Grease To The Bushing Ends Rebuilding The Passenger Side Installing The Upper Control Arm New Springs Next To The Old Ones Replacement Ball Joint Covers Getting The New Spring In Installing The Brake Assembly
Installing Kyb Gas A Just Shocks New Sway Bar Next To The Old One Tighten The Endlink Front End Rebuilt
PRI Trade Show
Chevy High Performance
Chevy Hi-Performance