2002 Chevy Corvette C5 Z06 Sway Bar Install
|
With the factory sway bar out of the way, we installed the adjustable G1 piece, which features a robust 11/16-inch diameter. All you need to do is replace the four bolts on the rear carriage, bolt it to LGM’s heavy-duty quiet endlinks, and connect the other side to the lower control arms. Based on LGM’s recommendation, we placed our endlinks (torque to 53 ft-lb) on the middle setting; moving the endlinks to the inside will stiffen the rear bar, whereas placing the endlinks outboard will soften it. View Related Article
|
|