There's nothing high performance about the early Nova's stock front suspension, and after driving our well-worn 1963 to work for a few months, we could see why people have famously cursed the front ends of these cars for years. The aftermarket, however, offers solutions to these antiquated front suspension designs with some bolt-on kits that can drastically improve your Nova's braking and handling. There are basically two types of frontend conversions for the 1962-65 and 1966-67 Novas: a full clip that gets rid of the shock towers and bolts in place of the stock subframe (the front half of the factory frame can unbolt on early Novas); and the type we installed, which uses a large bracket that attaches to the stock frame and allows you to bolt up a more conventional lower control arm and coilover assembly under the car.

We opted for Classic Performance Products Mini Subframe Kit (PN 6267PTK-2) and a Complete Front and Rear Disc Brake Kit (PN 6264FRBK-D) for our hardtop Hellion Nova, which includes CPP's 11-inch disc brakes, 2-inch forged drop spindles, and all necessary hardware. Our goal was to not only improve performance, but we also liked the ride height adjustability of the coilover. New disc brakes for all four corners not only meant better braking, be we'd be able to eliminate the four-lug hubs for the proper 5x4.75-lug pattern we'll need for the wheels we're running. The zinc-plated, drilled discs measure 11 inches so we can fit popular drag tire sizes.

Rocket Racing sent us a set of 15x6 rollers from their Fuel line (PN R23-566135), which features a classic five-spoke design that adds a nice touch of nostalgia to the car. The Rockets are wrapped in a set of Nitto's Neo Gen tires (205/50). Unfortunately, tire size is severely limited on early Novas, so unlike a lot of the cars you see in this magazine that have extra-wide meats on all four corners, the Hellion Nova will have to settle for a smaller set of rollers. The wheelwells on these early X-bodies simply don't have the real estate to allow anything larger than a 215, and some say even that's pushing it. If we were to remove the stock frame and shock towers with a whole front clip upgrade we could run larger fronts, but since this will be a street/strip drag car, we're only concerned with fitting a wider tire out back.

Installing the CPP Mini Subframe Kit and Big Brake Kit was something we'd do in our garage at home. Although we had the luxury of using a lift in the Source Interlink Tech Center, the whole installation was very doable, even for a hobbyist.