Chevy High Performance
Click here to find out more!
Chevy High Performance

Chevy Induction Systems & Performance

In this section we cover everything that makes your car go faster. From induction systems to installing nitrous oxide to supercharging your Chevy engine. Just remember where you got the info, so if we see you on the drag strip you have to let us win.
Engine Supercharging - Take Charge Engine Supercharging - Take Charge
Supercharging for the Masses more
Supercharged Engine Build - Bad To The Blown Supercharged Engine Build - Bad To The Blown
496 Cubic Inches Of ProCharged Power: The Build more
Nitrous Installation - A Big Shot Of Power Nitrous Installation - A Big Shot Of Power
Adding an Extra Punch to One High-Revving 377 more
1970 Chevy Camaro 5 Inexpensive Modifications - Budget Bliss 1970 Chevy Camaro 5 Inexpensive Modifications - Budget Bliss
5 inexpensive ways to go fast for less more
Gas Saving Modifications - Fight Back Oil Prices Gas Saving Modifications - Fight Back Oil Prices
Performance Modifications That Also Conserve Fuel more
Power Adders Guide Power Adders Guide
Choosing the right power adder for your application isn't easy--you need facts, facts, and more facts to make an informed... more
Gas Mileage - Old School Meets New School Gas Mileage - Old School Meets New School
How To Get EFI-Quality Mileage From Your Carburetor more
1982 Chevy Camaro Ignition & Nitrous Upgrade - My Generation Camaro, Part VII 1982 Chevy Camaro Ignition & Nitrous Upgrade - My Generation Camaro, Part VII
Going fast is all about eliminating the weak links in the performance chain. This is the seventh part of our buildup of the... more
My Generation Camaro,  Part VI - Nitrous Oxide Systems My Generation Camaro, Part VI - Nitrous Oxide Systems
Last time, we left off with the Camaro running 15.39 at 87.28 mph after we added ported World Products S/R Torquer heads... more
(page 1 2 )

Chevy Blogs

Detroit Speed's Chevelle Suspension
 Detroit Speed & Engineering is one of the best when it comes to performance suspension and last... more
Pork Chop Camaro
 We were at the GM Nationals in Carlisle, PA and this die cast Camaro actually caught our eye, this... more
Engine and trans bolted in
 Over the weekend we cleaned and painted our early Nova's transmission tunnel before shoehorning... more
From 6 to 8
 So we dropped our 385 stroker in our early Nova yesterday and learned we need V8 frame mounts... more
More Tri-Fives
If you like LS-powered Tri-Fives like we do, look for a full feature on Marcos Sandoval's 56' in an... more

Chevy Forums

Carb jetting ?
My combo is a sbc 355 Edelbrock performer heads milled down and had a 5 angle performance valve job... more
belt sizes
What are the belt sizes for a 1979 corvette with serpentine and v belt with no ac... more
Vexing oiling issue
Hello to the forum. This is a great site; I've lurked on and off for a long time and had many... more
switching 350 tbi to carb
ive got a 1987 chevy c10 small block 350 with tbi..i hate it a buddy of mine is giving me a new... more
what rear end gears should i use?
i have a 79 camaro with a small block 400 in it pretty much stock only mods are edelbrock performer... more
Chevy Hi-Performance