Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
Head Build Valvespring Testing
Performance Head Build - Some Assembly Required
UNDER PRESSURE
Not too many home builders are willing-or able-to drop six-and-a-half bills on a full-fledged bench-top valvespring tester. Luckily, Powerhouse Products has a low-buck alternative. This mini spring tester is easy to use. Simply place a spring and the tester in a vice (as shown), then compress the spring to its installed height (or the height you're checking), as measured with calipers. The gauge will give you the spring pressure-in this case, 110 pounds. Nice. An inexpensive flange allows the tester to be used in a drill press. View Related Article
Head Build Parts Head Build Surface Check Head Build Valve Stem Check Head Build Valve Guide Check Head Build Valve Guide Honing Head Build Valve Guide Check Head Build Valve Coating
Head Build Lapping Stick Head Build Valve Seat Intersection Head Build Valve Springs Head Build Valve Spring Height Check Head Build Valve Spring Height Check Head Build Spring Seats Head Build Valve Seal Install
Head Build Valve Install Head Build Spring Spressure Check Head Build Spring Install Head Build Tools Head Build Valvespring Testing Head Build Valve Stem Check Head Build Valve Stem Check
PRI Trade Show
Chevy High Performance
Chevy Hi-Performance