Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
Tuning The Carb For Maximum Performance
Tuning The Carb For Maximum Performance
Our first step as we began our runs was to do a little carb tuning to make sure we were making maximum power in baseline form. To facilitate this, car owner Daeseleer had an O2 sensor bung welded into his exhaust system. We ended up with an 80/91 jet combo and a 2.5 power valve in the Mighty Demon 750 carb. View Related Article
World Motown Cylinder Heads With Scorpion Rocker Arms Tuning The Carb For Maximum Performance Removing Instake System And Removing Old Cylinder Heads Combustion Chamber On World Cylinder Heads Closeup Of A 235 Runner On A Cylinder Head Manley Hardware For Cylinder Head Swap Owner Of Bep Performance Working On Cylinder Heads
Trick To Installing Valve Seals From Bep Performance Close Up Of Rocker Amrs With Larger Valves Added Thread Sealer Before Installing Studs And Guideplates Setup For Cylinder Heads When Installing Guideplates World Products Cylinder Heads Next To A Set Of Sportsman Ii Iron Heads Set Of Rocker Arms With Regular And Offset Rocker Amrs Rocker Arm Installed On Cylinder Head With Proper Clearance
Tightening Rocker Arms To Proper Specs Cylinder Heads And Rocker Arms Installed
Chevy High Performance
Chevy Hi-Performance