Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
Close Up Of Rocker Amrs With Larger Valves
358 Small Block Cylinder Head & Rocker Arm Upgrade - A Different World
The valves in these heads are 0.100 inch longer than stock, so we measured for proper pushrod length with a checking tool. The length came out to 7.900 inches; we picked up a set of Manley's one-piece 4130 chrome-moly rods to do the trick. View Related Article
World Motown Cylinder Heads With Scorpion Rocker Arms Tuning The Carb For Maximum Performance Removing Instake System And Removing Old Cylinder Heads Combustion Chamber On World Cylinder Heads Closeup Of A 235 Runner On A Cylinder Head Manley Hardware For Cylinder Head Swap Owner Of Bep Performance Working On Cylinder Heads
Trick To Installing Valve Seals From Bep Performance Close Up Of Rocker Amrs With Larger Valves Added Thread Sealer Before Installing Studs And Guideplates Setup For Cylinder Heads When Installing Guideplates World Products Cylinder Heads Next To A Set Of Sportsman Ii Iron Heads Set Of Rocker Arms With Regular And Offset Rocker Amrs Rocker Arm Installed On Cylinder Head With Proper Clearance
Tightening Rocker Arms To Proper Specs Cylinder Heads And Rocker Arms Installed
PRI Trade Show
Chevy High Performance
Chevy Hi-Performance