Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
Building A 10 Bolt Rearend Stock Pinion Depth Shim
Building A 10 Bolt Rearend Stock Pinion Depth Shim
Rodriguez installed our stock pinion depth shim (located between the pinion bearing and the pinion head), pressed on the pinion bearing, and installed the crush sleeve. Before it went into the housing, we applied ample white grease to the pinion surface. To lock it in for final, we added the factory yoke and fastened it on with the supplied pinion nut. View Related Article
Building A 10 Bolt Rearend Finished Building A 10 Bolt Rearend Housing Building A 10 Bolt Rearend Axle Building A 10 Bolt Rearend Back Building A 10 Bolt Rearend Differential Building A 10 Bolt Rearend Gauge Building A 10 Bolt Rearend Main Cap Removed
Building A 10 Bolt Rearend Removing Driver Side Main Cap Building A 10 Bolt Rearend Socket Building A 10 Bolt Rearend Axle Building A 10 Bolt Rearend Removing Seals Building A 10 Bolt Rearend Steel Street Axles Building A 10 Bolt Rearend Differential Bearings Building A 10 Bolt Rearend Stock Pinion Depth Shim
Building A 10 Bolt Rearend Old Components Removed Building A 10 Bolt Rearend Detroit Truetrac Building A 10 Bolt Rearend Hydraulic Press Building A 10 Bolt Rearend New Ring Gear Building A 10 Bolt Rearend New Carrier Assembly Building A 10 Bolt Rearend Moser Gears Building A 10 Bolt Rearend Checking Thickness
Building A 10 Bolt Rearend Correcting Backlash Building A 10 Bolt Rearend Gear Teeth Building A 10 Bolt Rearend Axle Spacer Building A 10 Bolt Rearend Performance Cover Building A 10 Bolt Rearend Nova
Chevy High Performance
Chevy Hi-Performance