Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
Building A 10 Bolt Rearend Correcting Backlash
Building A 10 Bolt Rearend Correcting Backlash
To check we still had the correct backlash, we placed a dial indicator onto the ring gear and following the factory specs (0.005-0.010 inch) we determined our housing’s backlash was well within range at 0.007 inch. View Related Article
Building A 10 Bolt Rearend Finished Building A 10 Bolt Rearend Housing Building A 10 Bolt Rearend Axle Building A 10 Bolt Rearend Back Building A 10 Bolt Rearend Differential Building A 10 Bolt Rearend Gauge Building A 10 Bolt Rearend Main Cap Removed
Building A 10 Bolt Rearend Removing Driver Side Main Cap Building A 10 Bolt Rearend Socket Building A 10 Bolt Rearend Axle Building A 10 Bolt Rearend Removing Seals Building A 10 Bolt Rearend Steel Street Axles Building A 10 Bolt Rearend Differential Bearings Building A 10 Bolt Rearend Stock Pinion Depth Shim
Building A 10 Bolt Rearend Old Components Removed Building A 10 Bolt Rearend Detroit Truetrac Building A 10 Bolt Rearend Hydraulic Press Building A 10 Bolt Rearend New Ring Gear Building A 10 Bolt Rearend New Carrier Assembly Building A 10 Bolt Rearend Moser Gears Building A 10 Bolt Rearend Checking Thickness
Building A 10 Bolt Rearend Correcting Backlash Building A 10 Bolt Rearend Gear Teeth Building A 10 Bolt Rearend Axle Spacer Building A 10 Bolt Rearend Performance Cover Building A 10 Bolt Rearend Nova
Chevy High Performance
Chevy Hi-Performance