P33885 Image Large
|
We had to use extremely tight radius bend tubing exiting the mufflers, so I actually ran a 21/2 -inch tube for tailpipes. A swedged piece connected the 3-inch muffler outlet to a piece of Burns Stainless 21/2-inch bend, the tightest I could find anywhere, and the rest of the 21/2 inches came from Borla. The hangers just behind the mufflers are from a late-model Chevy truck and are installed with the frame mount a little behind the muffler mount, so as the system grows, the hangers will straighten out. View Related Article
|
|
|
|