Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
540 Chevy Big Block Engine Build Checking Piston To Valve Clearance
540 Chevy Big Block Engine Build Checking Piston To Valve Clearance
Once the heads were bolted into place, Shoemaker set up the pushrods and rocker arms on one cylinder to check piston-to-valve clearance. Shoemaker does this by bringing the piston up to TDC, zeroing the dial gauge, then tightening the rocker bolt and compressing the lifter until the valve touches the piston. We had more than 0.130 inch clearance on the intake side and more than 0.155 inch on the exhaust. View Related Article
540 Chevy Big Block Engine Build Big Block Engine On Dyno 540 Chevy Big Block Engine Build Carillo Rods And Je Forged Pistons 540 Chevy Big Block Engine Build Tapped Piston Into Place 540 Chevy Big Block Engine Build Torqued Rod Cap Into Place 540 Chevy Big Block Engine Build One Piece Rear Main Seal 540 Chevy Big Block Engine Build Bolting In Milodon Oil Pan 540 Chevy Big Block Engine Build Installed Comp Cams Solid Lifters
540 Chevy Big Block Engine Build Brodix Race Rite Heads 540 Chevy Big Block Engine Build Installed Comp Cams Bumpstick 540 Chevy Big Block Engine Build Installed Fel Pro Gaskets 540 Chevy Big Block Engine Build 119Cc Bowl Bended Combustion Chambers 540 Chevy Big Block Engine Build Bolting Arp Head Bolts In 540 Chevy Big Block Engine Build Checking Piston To Valve Clearance 540 Chevy Big Block Engine Build Manley Rocker Studs And Pushrod Guides
540 Chevy Big Block Engine Build Setting The Valve Lash 540 Chevy Big Block Engine Build Filling Oem Instake Manifold Holes 540 Chevy Big Block Engine Build Setting Fel Pro Intake Gaskets 540 Chevy Big Block Engine Build Professional Products Hurricane Intake Manifold 540 Chevy Big Block Engine Build Holley 1000 Hp Carburator 540 Chevy Big Block Engine Build Running Engine On Dyno 540 Chevy Big Block Engine Build Big Block Peaking At 659Hp
Chevy High Performance
Chevy Hi-Performance