Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
540 Chevy Big Block Engine Build Setting The Valve Lash
540 Chevy Big-Block Engine Build - Toeing The Line
With our Manley pushrods and Comp Pro Magnum 1.7:1 rocker arms in place, Shoemaker set the valve lash. The hot setting on the cam card is 0.016/0.018-inch intake/exhaust. Shoemaker set the cold lash 0.006 tighter (0.010/0.012 inch) to compensate for the expansion that will happen as the engine heats up. The lash was rechecked once the engine reached operating temperature, of course. View Related Article
540 Chevy Big Block Engine Build Big Block Engine On Dyno 540 Chevy Big Block Engine Build Carillo Rods And Je Forged Pistons 540 Chevy Big Block Engine Build Tapped Piston Into Place 540 Chevy Big Block Engine Build Torqued Rod Cap Into Place 540 Chevy Big Block Engine Build One Piece Rear Main Seal 540 Chevy Big Block Engine Build Bolting In Milodon Oil Pan 540 Chevy Big Block Engine Build Installed Comp Cams Solid Lifters
540 Chevy Big Block Engine Build Brodix Race Rite Heads 540 Chevy Big Block Engine Build Installed Comp Cams Bumpstick 540 Chevy Big Block Engine Build Installed Fel Pro Gaskets 540 Chevy Big Block Engine Build 119Cc Bowl Bended Combustion Chambers 540 Chevy Big Block Engine Build Bolting Arp Head Bolts In 540 Chevy Big Block Engine Build Checking Piston To Valve Clearance 540 Chevy Big Block Engine Build Manley Rocker Studs And Pushrod Guides
540 Chevy Big Block Engine Build Setting The Valve Lash 540 Chevy Big Block Engine Build Filling Oem Instake Manifold Holes 540 Chevy Big Block Engine Build Setting Fel Pro Intake Gaskets 540 Chevy Big Block Engine Build Professional Products Hurricane Intake Manifold 540 Chevy Big Block Engine Build Holley 1000 Hp Carburator 540 Chevy Big Block Engine Build Running Engine On Dyno 540 Chevy Big Block Engine Build Big Block Peaking At 659Hp
PRI Trade Show
Chevy High Performance
Chevy Hi-Performance