Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
1973 Chevy Camaro Front Bumper Pulling Off Front Bumper
1973 Chevy Camaro Front Bumper Pulling Off Front Bumper
After the hood was removed, Miramontes took his time and moved onto the front end. He began by unbolting the single-piece front bumper. Once the factory bumper is removed, it'll give you additional access to the front. This would allow for the removal of the grille and whole front assembly. From there, Miramontes disconnected each headlight assembly. View Related Article
1973 Chevy Camaro Camaro With New Front End Parts 1973 Chevy Camaro With No Hood Removed Cowl Hood 1973 Chevy Camaro Front Bumper Pulling Off Front Bumper Chevy Camaro Front End Removed Front End Passenger Side Fender Removing Passenger Side Fender Camaro With Front End Removed Camaro With Front End Removed Passenger Side Fender Rust Damage To The Passenger Side Fender
New Passenger Side Fenders Installing New Fenders Lining Up New Front End Clip Installing Front End Clip Oer Clips Covering Holes With Oer Clips Front End Almost Installed Final Fitment Front End Front End Installed Front End Panels Installed Installing Nose Cone Putting In Nose Cone With Grille Nose Cone Installed Nose Cone And Grille Installed
Installing Turn Signal New Camaro Turn Signal Installed New 3 Inch Cowl Hood Installing New Harwood Cowl Hood Front End Installed Front End And The Cowl Hood Are Installed
Chevy High Performance
Chevy Hi-Performance