Chevy Hi-Performance Homepage Chevy High Performance
Facebook Click here to find out more!
Prev  Next
 
2002 Chevrolet Corvette Z06 Hood Install Marking Section To Be Removed
2002 Chevrolet Corvette Z06 Hood Install Marking Section To Be Removed
The LPE hood was originally designed for MagnaCharger’s line of MP 112 superchargers. Since we stepped up to their latest TVS 2300 supercharger, we knew the fitment would be close and possibly require additional clearancing. One of the more critical areas we marked was where the rear-facing supercharger pulley was touching the new hood. To fix this, we did have to remove a small section of the hood. View Related Article
2002 Chevrolet Corvette Z06 Hood Install Plain Hood 2002 Chevrolet Corvette Z06 Hood Install Ppg Paint 2002 Chevrolet Corvette Z06 Hood Install Marking 2002 Chevrolet Corvette Z06 Hood Install Marking Section To Be Removed 2002 Chevrolet Corvette Z06 Hood Install Belt 2002 Chevrolet Corvette Z06 Hood Install Hood Lifted Up 2002 Chevrolet Corvette Z06 Hood Install Unpainted Hood
2002 Chevrolet Corvette Z06 Hood Install Paint Stir Stick 2002 Chevrolet Corvette Z06 Hood Install Acrylic Clean 2002 Chevrolet Corvette Z06 Hood Install Sanding Edges 2002 Chevrolet Corvette Z06 Hood Install Working Top Side 2002 Chevrolet Corvette Z06 Hood Install Evercoat 2002 Chevrolet Corvette Z06 Hood Install Areas Filled With Evercoat 2002 Chevrolet Corvette Z06 Hood Install Sanding
2002 Chevrolet Corvette Z06 Hood Install Paint Gun 2002 Chevrolet Corvette Z06 Hood Install Primer 2002 Chevrolet Corvette Z06 Hood Install Wet Sanding 2002 Chevrolet Corvette Z06 Hood Install Wet Sanding Hood 2002 Chevrolet Corvette Z06 Hood Install Paint 2002 Chevrolet Corvette Z06 Hood Install Sanding Gaps 2002 Chevrolet Corvette Z06 Hood Install Buffing
2002 Chevrolet Corvette Z06 Hood Install Working Polish Into Hood 2002 Chevrolet Corvette Z06 Hood Install Under Hood 2002 Chevrolet Corvette Z06 Hood Install Finished
Chevy High Performance
Chevy Hi-Performance