Solid Roller Cams
|
As components in the valvetrain are changed or replaced, not only will the heights and tolerances need to be checked, but the pushrod length will also need to be looked into after a cam swap. We used an adjustable pushrod length checker, placing it in through the head until it nested in the lifter. We placed the rocker on top and adjusted the checker until the rocker reached its desired location. We then pulled it out and measured the length with 12-inch calipers. You'll only need to do this for one intake valve and one exhaust valve; there's no need to check every cylinder. View Related Article
|
|
|
|