Proj 14 Z
|
Cool air is a good thing, and a plentiful supply of clean, cold air is a great thing! We topped off our new intake and carb with an AIS ram-air intake kit. The fiberglass housing has two 4-inch openings that route air directly into the filter element. We used a drop base that positions the housing lower over the carb. You can mount the duct work and direct the clean air right to the fiberglass housing and into the carb by cutting two 4-inch holes in the radiator support. To grab the fresh air, we routed one duct to the original air inlet and the other into the fender opening. View Related Article
|
|
|
|