Chevy Hi-Performance Homepage Chevy High Performance
Prev Next
The studs must be torqued in place with 45 lb-ft of torque. The best time to do this is when the heads are already bolted on the engine. This way you can adjust the guideplates to best align the pushrods with the valves.
The Goodwrench Quest, Part VI

 The studs must be torqued in place with 45 lb-ft of torque. The best time to do this is when the heads are already bolted on the engine. This way you can adjust the guideplates to best align the pushrods with the valves.  View Related Article

 

Get Adobe Flash player
Source Interlink Media © 2008 Chevy Hi-Performance,
Source Interlink Media
All rights reserved. WEB-039